Iphepha leplastiki yobunjineli ye-UHWMPE PE1000
Iinkcukacha zeMveliso:
I-Polyethylene - Ubunzima beMolekyuli obuphezulu kakhulu
I-PE1000 inokumelana nokukrala okuphezulu, iipropati ezibalaseleyo zokutyibilika kunye nokuqina okuphezulu. Inokumelana okuhle kweekhemikhali, amandla aphezulu okuchaphazeleka kunye nokufunxwa okuncinci komswakama. I-PE1000 ikwahambelana nokutya kuzo zonke izicelo ezibalulekileyo zokucubungula.
| Indlela Yokucubungula | Ubude (mm) | Ububanzi(mm) | Ubukhulu (mm) |
| Ubungakanani bephepha le-mold | 1000 | 1000 | 10-150 |
|
| 1240 | 4040 | 10-150 |
|
| 2000 | 1000 | 10-150 |
|
| 2020 | 3030 | 10-150 |
| Ubungakanani bephepha lokukhupha | Ububanzi: ubukhulu＞20mm, ubuninzi bungaba yi-2000mm；ubukhulu≤20mm, ubuninzi bungaba yi-2800mm Ubude: obungenamda Ubukhulu: 0.5 mm ukuya kwi-60 mm | ||
| Umbala weShiti | Yendalo; mnyama; mhlophe; luhlaza okwesibhakabhaka; luhlaza njalo njalo | ||
Uphawu lweMveliso:
1. Ukumelana okurhabaxa okusoloko kukho kwi-polymer ye-thermoelectricity.
2. Ukumelana nokukhwankqiswa okungcono nokuba kubushushu obuphantsi.
3.Into engaphantsi yokungqubana, kunye nezinto zokuthwala ezityibilikayo.
4. Ukutyeba (akukho kugaywa, kunamathele).
5. Eyona ndlela ilungileyo yokumelana nokugqwala kweekhemikhali kunye nokumelana noxinzelelo.
6.Ubuchule obuhle kakhulu bokusebenza koomatshini.
7.Ukufunxwa kwamanzi okuphantsi kakhulu (<0.01%).
8. Ukuthintela umbane weparagon kunye nokuziphatha okuchasene nokumelana nobushushu.
9. Ukumelana okuhle okunamandla aphezulu okune-radioactive.
10. Uxinano luphantsi kunezinye iithermoplastics (< 1g/m3).
11.Usebenzisa ixesha elide uludwe lobushushu: -269°C--85°C.
Uvavanyo lweMveliso:
Ukumelana nokukrala okuphezulu
| Izixhobo | I-UHMWPE | I-PTFE | Inayiloni 6 | Intsimbi A | I-Polyvinyl fluoride | Intsimbi emfusa |
| Ixabiso lokunxiba | 0.32 | 1.72 | 3.30 | 7.36 | 9.63 | 13.12 |
Iipropati ezilungileyo zokuzithambisa, ukungqubana okuphantsi
| Izixhobo | Amalahle e-UHMWPE | Amalahle amatye axotyulweyo | Ihonjisiwe ipleyiti-amalahle | Ayinawo amalahle epleyiti ahlotshisiweyo | Amalahle ekhonkrithi |
| Ixabiso lokunxiba | 0.15-0.25 | 0.30-0.45 | 0.45-0.58 | 0.30-0.40 | 0.60-0.70 |
Amandla aphezulu empembelelo, ukuqina okuhle
| Izixhobo | I-UHMWPE | Ilitye eliphosiweyo | I-PAE6 | I-POM | F4 | A3 | 45# |
| Impembelelo amandla | 100-160 | 1.6-15 | 6-11 | 8.13 | 16 | 300-400 | 700
|
Ukusebenza kweMveliso:
| Into yoVavanyo | Indlela yoVavanyo | Isiphumo |
| I-Static Coefficient of Friction (ps) | I-ASTM D1894-14 | 0.148 |
| I-Kinetic Coefficient of Friction (px) | I-ASTM D1894-14 | 0.105 |
| Imodulus eguquguqukayo | I-ASTM D790-17 | 747MPa |
| Amandla empembelelo eNotched ye-Izod | Indlela ye-ASTM D256-10C1 A | 840J/m P (ikhefu eliyinxenye) |
| Ukuqina koLwandle | I-ASTM D2240-15E1 | D/64/1 |
| Imodulus yokuThatha | I-ASTM D638-14 | I-551 MPa |
| Tensile strength | I-ASTM D638-14 | 29.4MPa |
| Ukwandiswa ngexesha lokuphumla | I-ASTM D638-14 | 3.4 |
Ukupakisha imveliso:
Isicelo seMveliso:
